gl-inet-onescript/docker/do_docker.sh

#!/bin/sh
red() {
    echo -e "\033[31m\033[01m$1\033[0m"
}
green() {
    echo -e "\033[32m\033[01m$1\033[0m"
}
yellow() {
    echo -e "\033[33m\033[01m$1\033[0m"
}
blue() {
    echo -e "\033[34m\033[01m$1\033[0m"
}
light_magenta() {
    echo -e "\033[95m\033[01m$1\033[0m"
}
light_yellow() {
    echo -e "\033[93m\033[01m$1\033[0m"
}

# 查找USB设备分区
USB_DEVICES=$(lsblk -o NAME,RM,TYPE | grep '1 part' | awk '{print $1}')

if [ -z "$USB_DEVICES" ]; then
    echo "未找到USB设备分区。"
    exit 1
fi

# 遍历所有找到的USB设备分区
for USB_DEVICE_PART in $USB_DEVICES; do
    # 移除不必要的字符
    CORRECTED_PART=$(echo $USB_DEVICE_PART | sed 's/[^a-zA-Z0-9]//g')

    echo "找到USB设备分区: /dev/$CORRECTED_PART"
    
    # 检查USB设备分区是否已挂载,这是glinet自动挂载点 /tmp/mountd/diskX_partX
    AUTOMOUNT_POINT=$(mount | grep "/dev/$CORRECTED_PART " | awk '{print $3}')

    if [ -n "$AUTOMOUNT_POINT" ]; then
        echo "设备分区已挂载在 $AUTOMOUNT_POINT,正在尝试卸载..."
        # 停止docker服务 避免u盘占用
        /etc/init.d/docker stop
        sleep 2
        umount /dev/$CORRECTED_PART
        if [ $? -eq 0 ]; then
            echo "卸载成功。"
        else
            echo "卸载失败，请检查设备是否正被使用。"
            exit 1
        fi
    else
        echo "设备分区未挂载。"
    fi
    
    # 格式化分区为EXT4，你可以根据需要更改为其他文件系统类型
    red "正在格式化U盘: /dev/$CORRECTED_PART 为 EXT4..."
    mkfs.ext4 -F /dev/$CORRECTED_PART
    
    if [ $? -eq 0 ]; then
        green "格式化成功。"
    else
        red "\n U盘格式化失败"
        exit 1
    fi
done
yellow "为Docker Root 创建挂载点..."
USB_MOUNT_POINT="/mnt/upan_data"
DOCKER_ROOT="$USB_MOUNT_POINT/docker"
mkdir -p $DOCKER_ROOT

green "将挂载 U 盘到 $DOCKER_ROOT..."
mount -t ext4 /dev/$CORRECTED_PART $USB_MOUNT_POINT

# 检查挂载命令的退出状态
if [ $? -ne 0 ]; then
    red "挂载失败，脚本退出。"
    exit 1
fi
green "U盘挂载成功啦\n"
green "正在创建 Docker 配置文件 /etc/docker/daemon.json"
mkdir -p /etc/docker
echo '{
  "bridge": "docker0",
  "storage-driver": "overlay2",
  "data-root": "'$DOCKER_ROOT'"
}' >/etc/docker/daemon.json

# 安装 Docker 和 dockerd
opkg update
green "正在安装 Docker及相关服务..."
opkg install luci-app-dockerman >/dev/null 2>&1
opkg install luci-i18n-dockerman-zh-cn >/dev/null 2>&1
opkg install dockerd --force-depends >/dev/null 2>&1
if [ $? -eq 0 ]; then
    green "Docker 安装成功。"
else
    light_magenta "Docker 安装失败。"
fi
# 创建并配置启动脚本
green "正在设置 Docker 跟随系统启动"
cat <<'EOF' >/etc/init.d/docker
#!/bin/sh /etc/rc.common

START=99
USE_PROCD=1
PROG="/usr/bin/dockerd"

start_service() {
    procd_open_instance
    procd_set_param command $PROG --config-file /etc/docker/daemon.json
    procd_set_param stdout 1
    procd_set_param stderr 1
    procd_close_instance
}

stop_service() {
    killall dockerd
}

restart() {
    stop
    start
}
EOF

# 使启动脚本可执行并启用自启动
chmod +x /etc/init.d/docker
/etc/init.d/docker enable
/etc/init.d/docker start

green "设置开机挂载U盘后 再启动Docker"
# 首先，备份 /etc/rc.local
cp /etc/rc.local /etc/rc.local.backup
# U盘分区 /dev/sdx
USB_DEVICE_PART="/dev/$CORRECTED_PART"
# glinet系统重启后的 USB自动挂载点
SYSTEM_USB_AUTO_MOUNTPOINT="/tmp/mountd/disk1_part1"
# 卸载USB自动挂载点 挂载自定义挂载点 /mnt/upan_data
if ! grep -q "umount $SYSTEM_USB_AUTO_MOUNTPOINT" /etc/rc.local; then
    sed -i '/exit 0/d' /etc/rc.local

    # 将新的命令添加到 /etc/rc.local，然后再加上 exit 0
    {
        echo "umount $SYSTEM_USB_AUTO_MOUNTPOINT || true"
        echo "mount $USB_DEVICE_PART $USB_MOUNT_POINT || true"
        echo "/etc/init.d/docker start || true"
        echo "exit 0"
    } >>/etc/rc.local
fi

cat /etc/rc.local

# 修改 /etc/config/dockerd 文件中的 data_root 配置
sed -i "/option data_root/c\	option data_root '/mnt/upan_data/docker/'" /etc/config/dockerd
# 重启dockerd
/etc/init.d/docker restart
sleep 2
# 检查Docker是否正在运行
if ! docker info >/dev/null 2>&1; then
    red "Docker 启动失败"
else
    DOCKER_ROOT_DIR=$(docker info 2>&1 | grep -v "WARNING" | grep "Docker Root Dir" | awk '{print $4}')
    light_magenta "当前Docker根目录为: $DOCKER_ROOT_DIR"
    light_yellow "Docker根目录剩余空间:$(df -h $DOCKER_ROOT_DIR | awk 'NR==2{print $4}')"
    green "OK,Docker启动成功,建议重启一次"
fi

yellow "Docker 部署完毕,重启路由器来验证Docker是否正常工作。现在重启吗?(y/n)"
read -r answer
if [ "$answer" = "y" ] || [ -z "$answer" ]; then
    yellow "正在重启路由器..."
    reboot
else
    # 检查Docker是否正在运行
    if ! docker info >/dev/null 2>&1; then
        yellow "您还没有启动Docker。"
        exit 1
    else
        green "好吧,不重启也能用,建议先查看Docker根目录是否正确再开始使用。"
    fi
fi